Results 1 to 7 of 7

Thread: 5400T - no fuel flow reading

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1

    5400T - no fuel flow reading

    As I work through the last stages of my 4500 -> 5400 upgrade, I note that I have a fuel flow reading of zero. Looking over the manual, I see that page 135 of the 15.1 install manual says:
    "AF5000 EFIS only -- Pin 5 must be jumpered to Pin 7 to power the fuel flow transducer".

    I didn't do that on my 5400. Is that the reason I don't have a fuel flow reading the red cube?
    Attached Images Attached Images  
    Last edited by MacCool; 04-12-2021 at 05:27 AM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •