Results 1 to 4 of 4

Thread: How to set flap position indication

  1. #1

    How to set flap position indication

    I have a dual screen 4500. My flap indication always shows full flaps down. How do I calibrate to show proper flap positions?

  2. #2
    After a little more investigation I find that my system does not have the flap position indicator. I found on page 86 of the AFS manual what piece I need to order from Ray Allen. My question is about the wiring so that the flap position will show on my EFIS screen. I do have a Ray Allen electric elevator trim. I also have electric aileron trim.
    Any guidance about the proper would be appreciated.
    Thank you

  3. #3
    Advanced Flight Systems Shawn McGinnis's Avatar
    Join Date
    Sep 2012
    Location
    Canby, OR
    Posts
    748
    Once you have wired as described on page 86 you will calibrate the position shown on page 90.

    You can also reference this drawing for your internal engine board connector:
    https://www.advancedflightsystems.co...s-Standard.pdf
    Shawn McGinnis

    Advanced Flight Systems
    support@advanced-flight-systems.com

  4. #4

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •