Results 1 to 2 of 2

Thread: Sv-arinc ifd 540

  1. #1

    Sv-arinc ifd 540

    I'm installing a panel upgrade with two 5600s , IFD540, G5 and Dynon Com. I have an SV-ARINC and it does not seem to be communicating with the 540. All of my RS232 ports appear to be working:
    PFD receiving AVIATION from 540 port 1.
    - sending same AVIATION from 540 to ARINC on pin 3
    PFD sending ARNAV to 540 on port 1 - being received as ARNAV ei-fuel
    PFD receiving & sending 540 radio tuning on port 3.
    MFD sending ADSB data to 540 on port 2

    540 communicating with Avidyne 322 transponder (261 clone) on 540 port 2

    The SV Network shows the ARINC is present. When you go to the PFD Administration Diagnostics it shows:
    Name:  IMG_6843.jpg
Views: 368
Size:  59.7 KB



    I was able to get the following once:

    Name:  IMG_6829.jpg
Views: 369
Size:  63.1 KB

    Am I missing something? Do I need to put a route in the 540 for it to communicate?

  2. #2
    Rob H gave me a call. 15 minutes of config evaluation and a few changes and everything is working correctly. ARINC 429 issue was data types to/from the 540. I was guessing input as "Honeywell EFIS" from page 95 in install manual... should have been set to "EFIS/Airdata" for the 540. "GAMA 429 Graphics w/ INT" is the output setting not "GAMA 429".

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •