Results 1 to 2 of 2

Thread: Ray Allen Control Sticks

  1. #1

    Ray Allen Control Sticks

    Hello,

    I purchased Ray Allen G405 stick grips and was wanting to know if I needed to install the REL-2 relay decks that Ray Allen recommends for each trim servo? Due to the stick grips having SPDT switches and the trim servos needing DPDT action to operate they say it is necessary, but will the ACM act as the relay? I looked in the control stick schematics and cannot find any mention or location of a relay deck. Thanks in advance.

    Will
    RV-7 in progress

  2. #2
    Advanced Flight Systems Shawn McGinnis's Avatar
    Join Date
    Sep 2012
    Location
    Canby, OR
    Posts
    861
    The ACM uses the SV-AP-PANEL as the relay control of the trim servos. If you didn't opt for the auto-trim control you can wire the REL-2 in using this drawing.

    57871 R2 Elevator Trim Module Harness.pdf
    Shawn McGinnis

    Advanced Flight Systems
    support@advanced-flight-systems.com

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •