Results 1 to 2 of 2

Thread: Rotax CAN BUSS fuel flow

  1. #1

    Rotax CAN BUSS fuel flow

    With a 5600 (OS1) and a Rotax 912iS I get fuel flow from the CAN buss. What should the Admin page fuel flow settings be set to?

  2. #2
    You should just have to set your Max (Top of Gauge), Red High, and Yellow High values based on the Rotax manual. The sensor type and K factor do not apply for the 912IS.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •