Results 1 to 5 of 5

Thread: 2 Wire Oil Temp Sensor

  1. #1

    Post 2 Wire Oil Temp Sensor

    If you are having trouble with oil temperature changing while the alternator is running you may want to buy a 2 wire oil temp sender. We give you 3 choices for your convenience. Your favorite avionics vendor should have one in stock. Please see the attached document for more information.
    Attached Images Attached Images

  2. #2
    Where do you hook up the two wires?

  3. #3
    One wire goes to the normal input and the other goes to an EFIS engine connector ground wire.
    Rob Hickman
    Advanced Flight Systems Inc.

  4. #4
    I am reusing the two wire Oil Temp sender from the prior, Vision Microsystems Installation. This will prevent me from having to pull the engine to replace (trapped by accessory housing and engine mount). Is this particular sender represented by one of the senders in the list of two wire types?

  5. #5
    Advanced Flight Systems Shawn McGinnis's Avatar
    Join Date
    Sep 2012
    Location
    Canby, OR
    Posts
    861
    Quote Originally Posted by PDonlan View Post
    I am reusing the two wire Oil Temp sender from the prior, Vision Microsystems Installation. Is this particular sender represented by one of the senders in the list of two wire types?
    The type of this oil temp sensor is unknown. You could characterize the sensor but that's not necessarily trivial. There are 4 different types of sensors it could be: resistive, voltage, thermocouple, or current. You could try a resistance measurement vs ambient, then hit it with hot air and see how it changes.
    https://wiki.dynonavionics.com/Repla...th_SkyView_EMS
    Shawn McGinnis

    Advanced Flight Systems
    support@advanced-flight-systems.com

Similar Threads

  1. AFS Comm Wire Schematic
    By BSteeves in forum Technical Support Documents
    Replies: 1
    Last Post: 06-23-2016, 02:16 PM
  2. Aux Temp Sensor(s)
    By NoahF in forum Engine Sensor Installation Questions
    Replies: 4
    Last Post: 01-01-2015, 10:41 AM
  3. Oil temp sensor vs. kitchen thermometer in heated oil
    By timotb in forum Engine Sensor Installation Questions
    Replies: 11
    Last Post: 04-22-2014, 07:48 PM
  4. OAT / Magnetometer Wire gauge?
    By conlimon in forum EFIS Installation Questions
    Replies: 2
    Last Post: 01-03-2013, 11:55 AM
  5. Wire length for CHT/EGT harness
    By johnb in forum AF-3400s, AF-3500s, AF-4500s ... General Discussion
    Replies: 1
    Last Post: 06-19-2010, 06:49 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •