Results 1 to 2 of 2

Thread: Dual 3500 + AOA

  1. #1

    Dual 3500 + AOA

    I have a dual AF-3500 setup in my RV-7A, with the AOA option.

    I am installing a POS-12 position sensor for monitoring the flap position (needed for the AOA to work properly). My question is, can I wire the POS-12 to the Right-Side EFIS, even though my AOA sensor is connected to the Left-Side EFIS? i.e. will the flap position reading be shared from one screen to the other?

    I ask because presently I have a micro-switch installed, instead of the POS-12. The microswitch is connected to Input-1 on the Right-Side EFIS, and I have found that you CANNOT share an Input signal from one screen to the other. Someone told me the POS-12 connection is different, and the left screen will manage to get that data from the right screen... Any truth to that rumor??

    Matt P.

  2. #2
    Matt, that is true and it will work connecting the POS-12 to the right screen.
    ---
    Trevor Conroy
    Technical Support
    Advanced Flight Systems
    Support@Advanced-Flight-Systems.com

Similar Threads

  1. Dual Nav support
    By recapen in forum AF-3400s, AF-3500s, AF-4500s ... General Discussion
    Replies: 8
    Last Post: 05-16-2013, 08:31 AM
  2. Dual screen map
    By stickandrudderman in forum AF-3400s, AF-3500s, AF-4500s ... General Discussion
    Replies: 8
    Last Post: 11-18-2011, 10:20 AM
  3. Dual PMAGS and rpm signal
    By bigbird in forum AF-3400s, AF-3500s, AF-4500s ... General Discussion
    Replies: 0
    Last Post: 03-27-2011, 03:05 AM
  4. Dual OAT Sensors
    By Paul Winkels in forum AF-3400s, AF-3500s, AF-4500s ... General Discussion
    Replies: 1
    Last Post: 09-09-2010, 09:35 AM
  5. Moving map on dual screens
    By sjjonesnz in forum AF-3400, AF-3500 ... General Discussion
    Replies: 1
    Last Post: 04-10-2010, 05:13 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •