Results 1 to 4 of 4

Thread: Aithre CO monitor

  1. #1

    Aithre CO monitor

    I am looking to install an Aithre CO monitor. Can you direct me to the correct image of the wiring diagram to refer to?
    Their website is www.aithreaviation.com . Especially information to get the 5V power would be helpful.
    Thanks,
    Paul Collins
    N8ZV

  2. #2
    Interesting. The Aithre folks had me put the sensor into pin 12, the power into pin 19 and then ground to aircraft ground. It works in this set-up. Again, this is somewhat different.
    Paul C

  3. #3
    Advanced Flight Systems Shawn McGinnis's Avatar
    Join Date
    Sep 2012
    Location
    Canby, OR
    Posts
    861
    Quote Originally Posted by Paul Collins View Post
    Aithre folks had me put the sensor into pin 12, the power into pin 19
    Wiring to an AF-5000 EE/EM which is with Internal Engine Monitor
    Pin 12 Sensor Input (Coolant Temp reconfigured for CO)
    Pin 19 Sensor 5V
    Pin 37 Sensor Gnd (or any other EM ground 1,3,5,30,13,16,17,or 37)

    Wiring to an AF-5000 with SV-EMS
    Pin 1 Volts 1
    Pin 18 Sensor 5V
    Pin 17 Sensor Gnd (or any other SV-EMS ground 3, 5, 13, 16, 17, 30)
    Last edited by Shawn McGinnis; 04-20-2021 at 02:41 PM. Reason: Clarity SV-EMS vs Internal Engine
    Shawn McGinnis

    Advanced Flight Systems
    support@advanced-flight-systems.com

  4. #4
    Thanks for the explanation. The system works great, and so far no CO.
    Paul Collins
    N8ZV

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •