Results 1 to 2 of 2

Thread: How to display trim control

  1. #1

    How to display trim control

    Hello,

    I have an AFS4500 display running S8.8.42-MV16 firmware (Feb 2019). I generally fly with a 3-page overlaid view (AHRS, Map, Engine). In this configuration, the trim control does not display. To see trim, I need to bring up the checklist, where it shows up at the bottom. I would like the trim indicator to show up when I am using my standard 3-page overlaid view. Is there a configuration setting I can use to do this?

    Jeff

  2. #2
    Advanced Flight Systems Shawn McGinnis's Avatar
    Join Date
    Sep 2012
    Location
    Canby, OR
    Posts
    861
    You are correct in split AHRS/Map the AF-4500 doesn't have room to draw the trim indicator. I would recommend adding a page without the map split so you can toggle over to it. EFIS -> SETTINGS -> MORE -> PAGE LIST.
    Shawn McGinnis

    Advanced Flight Systems
    support@advanced-flight-systems.com

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •