Results 1 to 2 of 2

Thread: Dynon radio setup

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Junior Member
    Join Date
    Jul 2015
    Location
    Leesburg, VA
    Posts
    3

    Dynon radio setup

    I recently retired my Garmin SL30 and replaced it with the Dynon/Trig panel/remote unit.
    What changes do I need to make in the 5600T with Advanced Control Module to integrate this radio?
    Jim
    Last edited by N37PK; 01-02-2020 at 09:58 PM.

  2. #2
    1. Turn off the serial port that the SL30 was using
    2. Scan for the new radio in Advanced SV-NET Menu
    3. Change the SET > CAL > Radio menu to the new Dynon Com radio and serial number
    Rob Hickman
    Advanced Flight Systems Inc.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •