Results 1 to 2 of 2

Thread: AFS4500 no audio

  1. #1

    AFS4500 no audio

    I have an AFS4500, recently added an intercomm with switched inputs (pm3000) and the amx-2a to run some audio inputs. I have the transponder, gtn, and landing height controller all giving me audio through the headset now. I wanted to get the EFIS warnings working, so I wired pin 18 on the EFIS to pin 2 on the AMX (fixed input) and EFIS 16 to pin 15 on the AMX (audio ground).

    Running the audio test on the calibration page I get no audio on from the 4500. I verified my other audio inputs were working. I have the audio files on the 4500, and the 4500 indicates that sounds are playing but nothing; volume is 100%. Any suggestions?

  2. #2
    Advanced Flight Systems Shawn McGinnis's Avatar
    Join Date
    Sep 2012
    Location
    Canby, OR
    Posts
    674
    The EFIS is wired for a 560-ohm audio output so it sounds like you have connected it correctly. Do the other audio devices play? Assuming you have the AMX-2A into the unswitched side of the PM3000?
    Shawn McGinnis

    Advanced Flight Systems
    support@advanced-flight-systems.com

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •