Results 1 to 1 of 1

Thread: 5400T not sharing XM with 3500EM

  1. #1

    5400T not sharing XM with 3500EM

    I have a 5400T PFD and a 3500EM non-S. Both have the latest available system software and map files.

    My XM weather, which comes from a WxWorx receiver will display on whichever of the two screens I configure as the Wx Master, but not the other one. Also, when I configure the 3500 as "Slave" the screen display "XM-WX offline".

    The screens are communicating via an Ethernet hub and both showing air and engine data. The WxWorx is also communicating via the Ethernet hub.

    I did briefly try to configure both screens as Master and this appeared to work initially, but was unreliable after power cycling the screens.

    I have re-posted this question in a new thread with a more meaningful title, in the hope of attracting attention.

    Any suggestions please anyone?
    Last edited by Cojaken; 06-09-2019 at 06:37 AM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •