Results 1 to 4 of 4

Thread: Manual Corrections - 430 Channel 1 RS-232 Settings

  1. #1

    Manual Corrections - 430 Channel 1 RS-232 Settings

    Hi AFS,

    With reference to V7.0 of the manual, I noticed the following inconsistency:

    Page 55 (Garmin 430W/530W): The RS232 Channel 1 settings are 'ARNAV/ie-fuel|AVIATION'

    Page 85 ('ARINC 429 Main Cable' Schematic): The '430 Settings' states to set RS232 Channel 1 to OFF|AVIATION.

    Also, might you consider adding a forum dedicated to 'Manual Corrections'? I think this would be a good way to get updated information and corrections (not only technical but also typographical).

    Thank you,
    /\/elson

  2. #2
    Thank you!
    ---
    Trevor Conroy
    Technical Support
    Advanced Flight Systems
    Support@Advanced-Flight-Systems.com

  3. #3
    Quote Originally Posted by dnelson View Post
    Page 55 (Garmin 430W/530W): The RS232 Channel 1 settings are 'ARNAV/ie-fuel|AVIATION'

    Page 85 ('ARINC 429 Main Cable' Schematic): The '430 Settings' states to set RS232 Channel 1 to OFF|AVIATION.

    /\/elson
    Trevor, which is correct?

    Kent

  4. #4
    Page 55 is correct. 430W should be set to ARNAV/ei-fuel | AVIATION
    ---
    Trevor Conroy
    Technical Support
    Advanced Flight Systems
    Support@Advanced-Flight-Systems.com

Similar Threads

  1. Lycoming manual? Erase all settings? How to enable admin mode enable ..?
    By Alexw in forum AF-5600 & AF-5500 General Discussion
    Replies: 3
    Last Post: 01-09-2014, 03:52 PM
  2. Manual Power Off
    By rleffler in forum AF-3400s, AF-3500s, AF-4500s ... General Discussion
    Replies: 1
    Last Post: 07-10-2013, 06:40 PM
  3. New AF-5000 Manual
    By Rob Hickman in forum AF-5600 & AF-5500 General Discussion
    Replies: 0
    Last Post: 03-20-2013, 11:50 AM
  4. Updated AF-5000 Manual Ver 2.6
    By Rob Hickman in forum AF-5600 & AF-5500 General Discussion
    Replies: 0
    Last Post: 08-28-2012, 03:24 PM
  5. 4500 Schematic in Manual
    By schmoboy in forum EFIS Installation Questions
    Replies: 2
    Last Post: 05-20-2010, 08:53 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •