% power IO-360

[flyvans.com]

hi,

has anybody figured out the correct % power values for an IO-360 180+h.p. with electronic ignition and horizontal induction?
i'm trying to use a lycoming IO-360-M1B chart as a reference from the operators manual as the best i could find, but it is overly complicated to "reverse engineer" as it was meant to be used in the other direction.

i'm aware that it will be impossible to find a chart for our exact engine config: TMX-IO-360 with ECI cold air induction, ECI fuel injection, 1 mag, 1 pmag.

thanks for pointers,
bernie

www.flyvans.com

[flyvans.com]

John Goldsmith was kind enough to share his data-mining work.

http://www.flyvans.com/wordpress/wp-...mance-data.xls

feel free to reuse.

[dnelson]

Thanks for sharing John and Bernie!

/\/elson

[rushmckelvey]

Thanks for the INFO

Rush McKelvey

[anymouse]

John Goldsmith was kind enough to share his data-mining work.

http://www.flyvans.com/wordpress/wp-...mance-data.xls

feel free to reuse.

Thanks!!

Hopefully, this will work with a Superior XP-IOF-360 as well. Almost anything beats seeing 40% on takeoff!

[jkgoblue]

Does anyone have a similar spreadsheet for the IO-390?

[DONVS]

And maybe one for the IO360 200HP Angle valve TIA Don VS

[bigbird]

Does anyone out there have the % power figures for an IO390EXP?

[lancair390]

Here are my % power settings for the IO390.
Make sure there are no empty set points. This was my problem for a long time...

Christian