Results 1 to 2 of 2

Thread: Ethernet hub issues

  1. #1

    Ethernet hub issues

    When my two screens are connected together with an ethernet cable, they talk to each other.
    When they are connected via a hub, they do not.
    My AF3500EM talks to my Wxworx XM receiver via the hub. The AF5400T does not. I am going to swap out the cable that connects the AF5400T to the hub in case it is the problem, but would welcome any other suggestions.
    Last edited by Cojaken; 12-06-2018 at 06:40 PM.

  2. #2
    Quote Originally Posted by Cojaken View Post
    When my two screens are connected together with an ethernet cable, they talk to each other.
    When they are connected via a hub, they do not.
    My AF3500EM talks to my Wxworx XM receiver via the hub. The AF5400T does not. I am going to swap out the cable that connects the AF5400T to the hub in case it is the problem, but would welcome any other suggestions.
    It was indeed a bad ethernet cable from the AF5400T to the hub.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •