Results 1 to 4 of 4

Thread: AF-4500 FIS-B

  1. #1

    AF-4500 FIS-B

    Should FIS-B display on my 4500 now?

  2. #2
    Advanced Flight Systems Shawn McGinnis's Avatar
    Join Date
    Sep 2012
    Location
    Canby, OR
    Posts
    861
    Yep, to enable ADS-B Weather go to any map page and press [SETTINGS] -> [WX] -> [WX: ADS-B]
    Shawn McGinnis

    Advanced Flight Systems
    support@advanced-flight-systems.com

  3. #3
    I’ve done that. I get traffic but not showing weather.

  4. #4
    Advanced Flight Systems Shawn McGinnis's Avatar
    Join Date
    Sep 2012
    Location
    Canby, OR
    Posts
    861
    You may have NXRD turned off. Does toggling the NXRD button do anything?

    ADS-B Status Information [CHECK] -> [MAINT] -> [ABOUT]
    The ABOUT page displays pertinent information about the status of your ADS-B Weather receiver.
    Weather Status - Shows status information about the ADS-B interface.
    Not Parsing ADS-B Weather - The EFIS is not receiving FIS-B weather data
    ADS-B Mode - Displays either Master or Slave mode (Unit wired to the ADS-B device will be Master)
    Ownship Count - Number of messages the EFIS is receiving from the ADS-B device. Verifies connectivity
    Aged Times - Elapsed time since the last data update (METAR, TAF, TFR, NEXRAD, Winds, Lighting)
    Shawn McGinnis

    Advanced Flight Systems
    support@advanced-flight-systems.com

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •