Results 1 to 2 of 2

Thread: Oil Pressure Transducer

  1. #1
    Junior Member
    Join Date
    Mar 2010
    Southeastern, PA

    Oil Pressure Transducer

    I have a AF-3000 Non-S-type EFIS and EMS. I have recently changed my oil pressure transducer because it was acting up. I had a 0-100 psi. Swift type unit, and replaced it with a 0-150 psi. Swift unit. I didn't realize I had purchased a 0-150 psi unit until I installed it. I'm assuming the unit will output the correct pressure regardless of it's operating range. Is that a correct assumption?

    Thanks in advance.

    Steve Miceli
    Van's RV-6A
    IOF-360 FADEC
    Steve Miceli

  2. #2
    Advanced Flight Systems Shawn McGinnis's Avatar
    Join Date
    Sep 2012
    Canby, OR
    Different sensors react differently to pressure changes. You may need to re-calibrate the sensors lookup table within the EFIS. Email with the part number that you purchased and they can forward you the instructions.
    Shawn McGinnis

    Advanced Flight Systems, Inc.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts