AOA calibration manual for AFS-5600

[PAN-Denmark]

Looks like your AOA Module Config isn't setup properly.
What type of AOA pressure receiver are you using (Dynon Pitot/Wing Ports)?
Where do they connect (EFIS or SV-ADAHRS)?

the connection is at the EFIS (OS:1) (Older version AFS-5600) and I use wing ports.

The system was bought 2nd hand, but the AOA was never used by the previous owner. I seem to recall some serial number to be entered to activate the AOA ? is this correct ?

If you need files from the EFIS let me know.

regards
Per

[PAN-Denmark]

I took a look at the System.AFD file for my PFD unit.
It looks like AOA is not installed/enabled ? The tube fittings are on both my screens.

Sk


Thoughts ?