Results 1 to 4 of 4

Thread: AF-2500 coolant temp sensor input and display

  1. #1

    AF-2500 coolant temp sensor input and display

    Hi everyone,

    Just wondering if there is a way to connect and display coolant temp on a Rotax 912 install.

    Kind regards,

    Rob.

  2. #2
    Thank for the views,

    Im going to try using OAT or CHT6

  3. #3
    Advanced Flight Systems, Inc. Shawn McGinnis's Avatar
    Join Date
    Sep 2012
    Location
    Canby, OR
    Posts
    537
    If you use our OAT sensor it should work. Hooking it to a different sensor would be tricky as the probe is a custom current-based output.

    If you have an ungrounded J thermocouple you could use CHT5/6, I would recommend placing a jumper wire between - and + of the unused EGT/CHT inputs to keep them from floating. You will also probably need to turn off the low red warning zone.
    Shawn McGinnis

    Advanced Flight Systems, Inc.
    support@advanced-flight-systems.com

  4. #4
    Ya right. I also think it will work out. Lets try.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •