Results 1 to 2 of 2

Thread: 5500T data logs

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1

    5500T data logs

    I have my main buss connected to the SV-EMS pin 1 to measure alternator/battery voltage into the aircraft. I connected the IBBS battery information to pin 13 on the EFIS expansion plug. When I pull the data logs there is a Back Volts listed. Where is Back Volts measuring voltage?

    Thanks

    Scott

  2. #2
    Advanced Flight Systems Shawn McGinnis's Avatar
    Join Date
    Sep 2012
    Location
    Canby, OR
    Posts
    861
    SV-EMS pin 1 (or pin 2) is for SkyView displays only. This isn't read in the AF-5000 displays currently.

    Volts 2 (pin 13) should show the charge state of the IBBS.

    Back Volts is pin 6 of the EFIS Expansion, this should show passthrough voltage when passthrough power is flowing into the IBBS then show the internal IBBS voltage when the master is powered off.
    Shawn McGinnis

    Advanced Flight Systems
    support@advanced-flight-systems.com

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •