Results 1 to 5 of 5

Thread: Split screen engine monitor display

  1. #1

    Split screen engine monitor display

    I have a single screen AF5600 system. Accordingly I use the split screen mode almost exclusively. When displaying an approach plate I many times have to turn off the engine display so that I can see more of the approach plate. I would like to request an option that would shift the engine info to the left so that the entire right side can show an unobstructed approach plate. The shift could be done in a manner similar to what is shown on page 45 of the v15 manual. If other single screen users would like this option please chime in.

    Thanks for your consideration.
    Last edited by DickF; 02-05-2018 at 08:41 PM.

  2. #2
    Member
    Join Date
    May 2016
    Location
    Largo, FL, Based at Clearwater Airpark KCLW
    Posts
    30
    I would also like to see this, for the approach plates -- on the approach, the only engine info I normally look at are my MAP and RPM.

    (Also single-screen, 5600T)

    Ron
    Last edited by Ronsim; 02-06-2018 at 12:03 PM. Reason: added info

  3. #3
    good idea. i too have 5600 with same issue

  4. #4
    Advanced Flight Systems Shawn McGinnis's Avatar
    Join Date
    Sep 2012
    Location
    Canby, OR
    Posts
    658
    That's a nice feature request. I've added it to our feature list for software to consider.
    Shawn McGinnis

    Advanced Flight Systems
    support@advanced-flight-systems.com

  5. #5
    Quote Originally Posted by Shawn McGinnis View Post
    That's a nice feature request. I've added it to our feature list for software to consider.
    Hi Shawn,

    Just a followup - did this make the “todo” list? If so, when might it be available?

    Dick

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •