Results 1 to 2 of 2

Thread: 4500sEE rotax 912s integration questions

  1. #1

    4500sEE rotax 912s integration questions

    new guy with a used AF4500sEE system. Couple of questions regarding whether the engine board used on a Lyc installation will work on a rotax 912s install.
    It looks like the tank 3 and 4 can be used to display rotax CHT, can anyone confirm this one?
    Do i need a separate RPM board (PN71240?) for RPM conditioning with the 912S?
    Thanks in advance
    Mike S

  2. #2
    Advanced Flight Systems Shawn McGinnis's Avatar
    Join Date
    Sep 2012
    Location
    Canby, OR
    Posts
    861
    When setting the Engine Type to Rotax you can use the Rotax CHT's. You may need to install a 1.02k pull-up resistor if the tank is currently set for capacitive senders.

    The RPM board is used to connect to the Rotax RPM output. There is also a resistor network needed to convert the 4-20mA Oil... pressure (i think) to work with the EFIS. I can check when I'm back in the office.
    Shawn McGinnis

    Advanced Flight Systems
    support@advanced-flight-systems.com

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •