Results 1 to 2 of 2

Thread: Tachometer and manifold pressure readings quit at same time

  1. #1

    Exclamation Tachometer and manifold pressure readings quit at same time

    Run up was fine, upon climb out, both the tachometer and MAP readings went offline...(to zero).

    Connectors on the back of the EFIS appear secure, everything else works...no burnt smells, or tripped breaker.
    Only had time for a cursory inspection today.

    If anyone has any suggestions of where to start looking, I would really appreciate the help.

    Thanks,

    Scott

  2. #2
    Advanced Flight Systems, Inc. Shawn McGinnis's Avatar
    Join Date
    Sep 2012
    Location
    Canby, OR
    Posts
    476
    Normally those two sensors don't interact with each other. They do share the same power, how was fuel flow, during the event? Can you send some system and data logs to our support@advanced-flight-systems.com?
    Shawn McGinnis

    Advanced Flight Systems, Inc.
    support@advanced-flight-systems.com

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •