Results 1 to 3 of 3

Thread: RPM indication with emags

  1. #1

    RPM indication with emags

    I've just replaced my conventional mags with electronic emags.
    I moved the rpm wire from pin 32 to pin 33 on the D sub on the 4500EM as shown in the available info but my rpm reading is way too high; showing 2700 at around 1000.
    Any idea what I did wrong please?

  2. #2
    Change the pulses per rev setting in calibration
    Rob Hickman
    Advanced Flight Systems Inc.

  3. #3
    Thanks for the quick response Rob.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts