Results 1 to 2 of 2

Thread: AOA audio missing

  1. #1

    AOA audio missing

    I finally got around to calibrating my AOA (Dynon heated pitot / AOA with AF5600), works well, but no audio. I have the audio "on" (bar over AOA on EFIS page) and audio "on" on the "set - cal" page. Other audio alerts work fine (altitude, traffic, oil pressure, fuel qty, AP on/off, etc.).

  2. #2
    Advanced Flight Systems, Inc. Shawn McGinnis's Avatar
    Join Date
    Sep 2012
    Location
    Canby, OR
    Posts
    535
    With a Dynon Pitot Tube installed start with a Landing Warning Override of 2, Wing Port users should start at 8.

    Lower the number if the warnings don't occur as you flair for landing. Raise the number is the warning doesn't stop when taxiing.


    SET -> Hold CAL -> Angle of Attack (AOA) -> Landing Warning Override (psf)
    Shawn McGinnis

    Advanced Flight Systems, Inc.
    support@advanced-flight-systems.com

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •