Results 1 to 3 of 3

Thread: Toggling between gnav and internal flight plan and back

  1. #1

    Toggling between gnav and internal flight plan and back

    Entering a gnav flight plan shows up on the 5600 but when I go to execute a leg from 5600 it asks me if I want to switch to internal flight plan. Mistakenly said yes, but then if I go back to gnav flight plan and try again to fly leg it takes me to internal flight plan which has empty routes. It locks into internal flight plan and doesn't allow the gnav flight plan to be active. Requires reboot to fix. Is there another way?
    Dave Ford
    RV10

  2. #2
    Advanced Flight Systems Shawn McGinnis's Avatar
    Join Date
    Sep 2012
    Location
    Canby, OR
    Posts
    861
    So you are finding that you can no-longer press GNAV1 from the FPL menu after selecting YES to the switch request? Are you running 12.08.08 or 13.04.07?
    Shawn McGinnis

    Advanced Flight Systems
    support@advanced-flight-systems.com

  3. #3
    Quote Originally Posted by Shawn McGinnis View Post
    So you are finding that you can no-longer press GNAV1 from the FPL menu after selecting YES to the switch request? Are you running 12.08.08 or 13.04.07?
    Actually 13.04.03
    Dave Ford
    RV10

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •