Results 1 to 3 of 3

Thread: Change VOR/LOC Radial when using Garmin COM/NAV SL30

  1. #1
    Member
    Join Date
    Oct 2016
    Location
    Copenhagen, Denmark
    Posts
    49

    Change VOR/LOC Radial when using Garmin COM/NAV SL30

    Hi,

    Is it just me doing something wrong, but when I use my SL30 and dial in a VOC or LOC - I am unable to change the radial on the HSI on my AF5600 ? I can track directly inbound/outbound, but if I want to select a certain inbound radial and track that I can't figure out how-to.

    rgds
    Per
    Copenhagen, Denmark

  2. #2
    Member
    Join Date
    Oct 2016
    Location
    Copenhagen, Denmark
    Posts
    49
    Bump to the top... Is this me not doing things right or is it a common problem ?

  3. #3
    Advanced Flight Systems, Inc. Rob Hickman's Avatar
    Join Date
    Mar 2010
    Posts
    1,110
    The CRS knob should change it.

    The Indicator Head Type setting should be set to SERIAL in the SL30. This will enable the OBS to be set from the SL30 buttons and from the EFIS.
    Rob Hickman
    Advanced Flight Systems Inc.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •