Page 2 of 2 FirstFirst 12
Results 11 to 14 of 14

Thread: ADS-B for 4500

  1. #11
    Junior Member
    Join Date
    May 2016
    Location
    Largo, FL, Based at Clearwater Airpark KCLW
    Posts
    9
    Please report back on the altitude issue ---- my hangar neighbor, and I, 5500T and 5600T Navworx, are considering the Echo, also.

    Ron

  2. #12
    Advanced Flight Systems, Inc. Shawn McGinnis's Avatar
    Join Date
    Sep 2012
    Location
    Canby, OR
    Posts
    471
    When wiring to an AF-5000 are you using two serial ports for GDL90 and TMAP to control the echoUAT or relying on barometric altitude being learned wirelessly fromthe legacy transponder interrogation replies?

    Or what are your Serial 1 and Serial 2 settings on the echoUAT?
    Shawn McGinnis

    Advanced Flight Systems, Inc.
    support@advanced-flight-systems.com

  3. #13
    I've been trying to get an Echo UAT to talk to my 4500 - as a replacement for a NavWorx box. The output of the echo UAT is GDL-90 and 115k baud. I'm trying to figure out what format to configure in the 4500 so far with no success, it was previously port 3 ADSB-57Kbaud. There are a myriad of selections, but none say the baud rate or specifically gdl-90. Which should I be using?

    Thanks!
    Mark

  4. #14
    Advanced Flight Systems, Inc. Shawn McGinnis's Avatar
    Join Date
    Sep 2012
    Location
    Canby, OR
    Posts
    471
    Quote Originally Posted by molson309 View Post
    ..but none say the baud rate
    Update your software to install the option for ADSB 115K.
    http://dynonavionics.com/af-3000-400...re-updates.php
    Shawn McGinnis

    Advanced Flight Systems, Inc.
    support@advanced-flight-systems.com

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •