Page 2 of 2 FirstFirst 12
Results 11 to 18 of 18

Thread: ADS-B for 4500

  1. #11
    Member
    Join Date
    May 2016
    Location
    Largo, FL, Based at Clearwater Airpark KCLW
    Posts
    31
    Please report back on the altitude issue ---- my hangar neighbor, and I, 5500T and 5600T Navworx, are considering the Echo, also.

    Ron

  2. #12
    Advanced Flight Systems Shawn McGinnis's Avatar
    Join Date
    Sep 2012
    Location
    Canby, OR
    Posts
    861
    When wiring to an AF-5000 are you using two serial ports for GDL90 and TMAP to control the echoUAT or relying on barometric altitude being learned wirelessly fromthe legacy transponder interrogation replies?

    Or what are your Serial 1 and Serial 2 settings on the echoUAT?
    Shawn McGinnis

    Advanced Flight Systems
    support@advanced-flight-systems.com

  3. #13
    I've been trying to get an Echo UAT to talk to my 4500 - as a replacement for a NavWorx box. The output of the echo UAT is GDL-90 and 115k baud. I'm trying to figure out what format to configure in the 4500 so far with no success, it was previously port 3 ADSB-57Kbaud. There are a myriad of selections, but none say the baud rate or specifically gdl-90. Which should I be using?

    Thanks!
    Mark

  4. #14
    Advanced Flight Systems Shawn McGinnis's Avatar
    Join Date
    Sep 2012
    Location
    Canby, OR
    Posts
    861
    Quote Originally Posted by molson309 View Post
    ..but none say the baud rate
    Update your software to install the option for ADSB 115K.
    http://dynonavionics.com/af-3000-400...re-updates.php
    Shawn McGinnis

    Advanced Flight Systems
    support@advanced-flight-systems.com

  5. #15
    Is there any solution for ADSB in and out that has both frequences, 978 and 1090, that will show on the 4500? I know the GTX 345 has the capabilities but will it show aircraft and weather on the 4500?

  6. #16
    Quote Originally Posted by velo1 View Post
    I know the GTX 345 has the capabilities but will it show aircraft and weather on the 4500?
    No; the GTX345 (unless something's changed recently) does not have the option to output the GDL90 format that the 4500 accepts. I installed a GTX335 (1090ES Out-only), giving me the option to choose whatever In unit suits best. I'm running a Stratux right now with both 1090 and 978 receivers, serial out to the 4500 and Wifi to my Ipad.
    --
    Joshua Wyatt
    RV-9A N627DW @ KRST - Flying
    4500sEE + 4500sMFD | Stratux Dual-Band, GTN650Xi

  7. #17
    Would the GDL-52 R work for ADS-B in with the AF-4500? Right now I

  8. #18
    Advanced Flight Systems Shawn McGinnis's Avatar
    Join Date
    Sep 2012
    Location
    Canby, OR
    Posts
    861
    Quote Originally Posted by Lagonia View Post
    Would the GDL-52 R work
    I'm going to doubt that Garmin has released a product with GDL-90 output. Any product with proper GDL-90 ADS-B out over 115K or 57K will interface to the AF-3/400s displays.
    Shawn McGinnis

    Advanced Flight Systems
    support@advanced-flight-systems.com

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •