Results 1 to 2 of 2

Thread: Relocate Sport AOA Display

  1. #1
    Junior Member
    Join Date
    May 2016
    Largo, FL, Based at Clearwater Airpark KCLW

    Relocate Sport AOA Display

    I am installing a new 5600T and re-doing my panel --- I would like to move my sport AOA display (row of lights) from the glare shield to the panel --- is there a way to disconnect the ribbon wire from the display, (without cutting it and re-splicing) so I can re-thread it to my panel?

    (Lots more questions to follow, as I get into the wiring!)



  2. #2
    Advanced Flight Systems Shawn McGinnis's Avatar
    Join Date
    Sep 2012
    Canby, OR
    Remove the two screws and the connector will pull out of the display. Removing the connector from the bare cable is a bit more tricky. I would recommend cutting and replacing the connector at that point.
    Shawn McGinnis

    Advanced Flight Systems

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts