-
Network failing between units
Hi,
I have 2 AFS 5600 rev 1. PFD is set to have address 175 and MFD to have 176.
Up until now they have been communicating flawlessly, but now somethings gone wrong and the units are not communicating any more. When I have the crossover cable in there is no communication and the network card lights solid green and regular frequency flashing yellow. If I remove the network cable the lights are the same.
I think I can trace the problem back to when I did the cabling for the back.up power to the EFIS Extension D-Sub on pin 6 (power) and 15 (ground). The ground wires are connected but the power is still to be connected. Can this be the reason ?
Is there any way to test the network ?
rgds
Per
Copenhagen
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules