Results 1 to 5 of 5

Thread: Serial port assignments

  1. #1

    Serial port assignments

    I have the following equipment from my order with a 5600, which totals 5 serial ports. What is the appropriate assignment? It seems from the discussion that port 0 isn't available.

    AFS GPS 73102
    IFD 540
    AFS ADSB (74112)
    PAC15
    Transponder (74109)

    Recommendations?

  2. #2
    Advanced Flight Systems Shawn McGinnis's Avatar
    Join Date
    Sep 2012
    Location
    Canby, OR
    Posts
    861
    Your order has the SV-ADAHRS, so you have access to serial 0.

    Name:  ef-wiring.jpg
Views: 1576
Size:  19.3 KB
    Shawn McGinnis

    Advanced Flight Systems
    support@advanced-flight-systems.com

  3. #3
    Shawn,

    Currently my 5500 serial ports are configured as:

    PFD

    0 - disabled
    1 - atvn/arnav
    2 - vpx
    3 - Vizion AP
    4 - arinc

    MFD

    0 - disabled
    1 - Navworx adsb
    2 - trfc/icarus
    3 - coguardian
    4 - AFS gps 250

    I am getting ready to install the Dynon 261 transponder and the Dynon 472 adsb. Are there any limitations with what can be installed on port 0? Will port 0 work for the transponder?

    Thanks,

    Bob
    Last edited by rleffler; 12-17-2017 at 07:44 PM.
    Bob Leffler
    N410BL - RV10 - Flying
    http://mykitlog.com/rleffler

  4. #4
    Advanced Flight Systems Shawn McGinnis's Avatar
    Join Date
    Sep 2012
    Location
    Canby, OR
    Posts
    861
    No limitations, use PFD for the transponder and MFD for the ADS-B.
    Shawn McGinnis

    Advanced Flight Systems
    support@advanced-flight-systems.com

  5. #5
    Quote Originally Posted by Shawn McGinnis View Post
    No limitations, use PFD for the transponder and MFD for the ADS-B.
    thanks! Now I just have to wait for Dynon to start shipping
    Bob Leffler
    N410BL - RV10 - Flying
    http://mykitlog.com/rleffler

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •