Results 1 to 3 of 3

Thread: Fixed gear calibration

  1. #1

    Fixed gear calibration

    With my older separate box unit - I did the calibration procedure this weekend. After the procedure was finished for flaps up and down, I got the landing gear warning continuously until I powered the unit off.

    Is there a way to 'null' the gear warning in the 1LE page?
    I don't specifically remember - but I think since the book said optional - I didn't wire the gear switch. Thinking I could simply wire that direct to ground....

  2. #2
    Advanced Flight Systems Shawn McGinnis's Avatar
    Join Date
    Sep 2012
    Location
    Canby, OR
    Posts
    861
    The simplest is to calibrate the landing gear value in the hanger like a HC. Also wiring that pin to ground works for disabling the alert.
    Shawn McGinnis

    Advanced Flight Systems
    support@advanced-flight-systems.com

  3. #3

Similar Threads

  1. Voice for Gear Warning
    By ricgc in forum AF-3400, AF-3500 ... General Discussion
    Replies: 8
    Last Post: 03-07-2015, 07:32 AM
  2. Landing Gear Advisory Bug
    By beaugeste in forum AF-5600 & AF-5500 General Discussion
    Replies: 1
    Last Post: 08-24-2013, 03:21 PM
  3. Bad EGT fixed.
    By tomhanaway in forum Engine Sensor Installation Questions
    Replies: 0
    Last Post: 03-20-2013, 11:49 AM
  4. Disabling Landing gear switch for fixed gear
    By recapen in forum Installation Questions
    Replies: 1
    Last Post: 04-09-2010, 01:21 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •