Results 1 to 2 of 2

Thread: AFS ARINC install support

  1. #1

    AFS ARINC install support

    I am installing the IFD540 tray & connectors, the system is looking for 6 ARINC inputs, 4 for gps, 2 for VOR/ILS. There are only 2 supplied pins 13,25 ARINC out for gps and VOR/ILS. How do I get data from the AF-ARINC module for additional gps and VOR/ILS? Is it a resolution to split that signal and use it for all? The output also goes to autopilot.
    Last edited by rvdave; 05-08-2016 at 07:07 AM.
    Dave Ford
    RV10

  2. #2
    The IFD-540 wires just like the 430W/530W and does not require 6 ARINC inputs. Send me an email and I can send you a drawing.

    Rob@Advanced-Flight-Systems.com
    Rob Hickman
    Advanced Flight Systems Inc.

Similar Threads

  1. skyview support
    By brianjohnson in forum AF-5600 & AF-5500 General Discussion
    Replies: 3
    Last Post: 02-13-2014, 09:20 AM
  2. GTR-225/255 & GTN support
    By benwestfall in forum AF-5600 & AF-5500 General Discussion
    Replies: 1
    Last Post: 10-14-2013, 02:50 PM
  3. VPX pro support
    By hackmo15 in forum AF-5600 & AF-5500 General Discussion
    Replies: 6
    Last Post: 08-09-2013, 11:23 AM
  4. Dual Nav support
    By recapen in forum AF-3400s, AF-3500s, AF-4500s ... General Discussion
    Replies: 8
    Last Post: 05-16-2013, 08:31 AM
  5. XM radio support
    By Deene in forum AF-5600 & AF-5500 General Discussion
    Replies: 4
    Last Post: 03-04-2012, 09:11 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •