Results 1 to 9 of 9

Thread: Remote comm installation

  1. #1

    Remote comm installation

    Does the remote comm radio require the connection of the panel control head? I would like to install the radio and control it through either EFIS without the panel control head.

    Thanks

  2. #2
    I would like to do the same.

  3. #3
    Advanced Flight Systems Shawn McGinnis's Avatar
    Join Date
    Sep 2012
    Location
    Canby, OR
    Posts
    861
    It does require a connection to the control head but it wouldn't need to be mounted on the panel. I have some customers that have mounted them for rear seat control, or in door panels.
    Shawn McGinnis

    Advanced Flight Systems
    support@advanced-flight-systems.com

  4. #4
    Thanks, is it possible to get the manual and also the price (couldn't find either on the website).

  5. #5
    Advanced Flight Systems Shawn McGinnis's Avatar
    Join Date
    Sep 2012
    Location
    Canby, OR
    Posts
    861
    SV-COM-C25 $1,295
    SV-COM-X83 $2,195

    http://www.dynonavionics.com/docs/SkyView_COM.html
    Shawn McGinnis

    Advanced Flight Systems
    support@advanced-flight-systems.com

  6. #6
    No actual installation manual for it (or user manual), rather they are contained within the Skyview Installatuon Manuel and the User Manual. It mentions the Skyview network, without having to read the whole install manual (it doesn't describe how the Skyview connection is made in the section on the SV-Com), how do I connect it to the AFS (I have the 5400). I assume it is via a serial port. I currently only have spare ports available on my MFD...will that work?

  7. #7
    Junior Member
    Join Date
    Apr 2010
    Location
    Ponte Vedra Beach FL, Point Pleasant Beach NJ
    Posts
    22
    It connects via the SV Network to the 5400.

  8. #8
    I don't know what the SV network is? Is that an RS232 connection to an available port on the AF-5400? Can I put it on the MFD (since I have no available ports on my PFD)?

  9. #9
    Advanced Flight Systems Shawn McGinnis's Avatar
    Join Date
    Sep 2012
    Location
    Canby, OR
    Posts
    861
    The AF-5000 R7 EFIS Expansion harness has the connections for the SV-Network


    Shawn McGinnis

    Advanced Flight Systems
    support@advanced-flight-systems.com

Similar Threads

  1. AFS Comm Wire Schematic
    By BSteeves in forum Technical Support Documents
    Replies: 1
    Last Post: 06-23-2016, 02:16 PM
  2. Afs comm no squelch control
    By rvdave in forum EFIS Installation Questions
    Replies: 1
    Last Post: 07-17-2015, 03:27 PM
  3. Remote Nav install
    By rvdave in forum AF-5600 & AF-5500 General Discussion
    Replies: 1
    Last Post: 05-29-2015, 10:29 AM
  4. GPS COMM won't comunicate with 3500s or 3400s
    By LyleM in forum AF-3400s, AF-3500s, AF-4500s ... General Discussion
    Replies: 4
    Last Post: 05-18-2014, 08:16 AM
  5. AFS Comm & VAL Comm 2KR
    By rv8iator in forum Announcements & Info
    Replies: 1
    Last Post: 11-01-2012, 04:12 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •