Results 1 to 4 of 4

Thread: Using Dynon capacitive sender adapter with AF-2500

  1. #1

    Using Dynon capacitive sender adapter with AF-2500

    Is it possible to use the Dynon adapters with an AF2500?

    Thanks,
    Dave

  2. #2
    Is it as simple as cutting JP6 & JP7? Then use the 5V supply, ground, and tank connections to connect to the Dynon senders?

    Dave

  3. #3
    Advanced Flight Systems Shawn McGinnis's Avatar
    Join Date
    Sep 2012
    Location
    Canby, OR
    Posts
    861
    Correct, here is the official blurb :

    To convert from FLOAT to CAPACITANCE style senders Cut the JP6 and JP7 jumpers found directly under the “Float Fuel” label on the rear of the PCB. Take care
    not to damage the PCB and ensure the jumper is completely removed with ohmmeter.

    Then recalibrate the system.
    Shawn McGinnis

    Advanced Flight Systems
    support@advanced-flight-systems.com

  4. #4
    Thanks, Shawn. They are working great.

    Thanks,
    Dave


    Quote Originally Posted by Shawn McGinnis View Post
    Correct, here is the official blurb :

    To convert from FLOAT to CAPACITANCE style senders Cut the JP6 and JP7 jumpers found directly under the “Float Fuel” label on the rear of the PCB. Take care
    not to damage the PCB and ensure the jumper is completely removed with ohmmeter.

    Then recalibrate the system.

Similar Threads

  1. Capacitive Fuel Adapters
    By CharlieWaffles in forum AF-3400s, AF-3500s, AF-4500s ... General Discussion
    Replies: 14
    Last Post: 09-19-2015, 06:37 AM
  2. wi-fi adapter
    By amekler in forum AF-5600 & AF-5500 General Discussion
    Replies: 8
    Last Post: 05-22-2015, 08:33 AM
  3. arinc adapter
    By rv8iator in forum EFIS Installation Questions
    Replies: 2
    Last Post: 09-23-2012, 09:29 PM
  4. AF-Pilot without ARINC-Adapter?
    By Mgeiss in forum General Discussion
    Replies: 3
    Last Post: 05-07-2012, 11:03 AM
  5. Calibrating Fuel Level with Capacitive Senders
    By NoahF in forum AF-3400s, AF-3500s, AF-4500s ... General Discussion
    Replies: 7
    Last Post: 07-22-2010, 01:54 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •