Results 1 to 3 of 3

Thread: v12.02.02 Questions

  1. #1

    v12.02.02 Questions

    Hi Shawn,

    I'm running V12-02-02 software with the Dynon charts from Seattle Avionics on a non-touch AF5600. I have a couple of questions/observations-

    1. When using the FD the wingtip is "blue/grey" even though the altitude bug is properly controlling altitude with the AP. In version 10 the tip would have been yellow. Is this a change or a bug? fyi - the wing is yellow when being controlled by the heading bug - only the tip is blue/grey.

    2. I have a Navworx ADS600-B installed and the map screen is properly showing traffic. The ADSB box is showing the number of ADSB targets but below that indicates "No Radar". What does "No Radar" mean? I have a Garmin 327 transponder installed and it is showing interrogations.

    3. I have a single screen system and when in split screen mode the engine instruments overlay part of the map making the map difficult to read. This is especially troublesome when approach plates are being displayed. In version 10, the engine info shifted to the left. Any chance that shift can be restored in v12?

    4. The map "range" distance is not being displayed - or at least I can't find it.

    5. This may be a Seattle Avionics question, but I am unable to pull up approach plates for a nearby airport (F00). The plates are properly loaded on the GTN650 and I can fly the approach, just can't show the plate on the 5600. Not sure how to "de-bug" this. Is there a way to see if the data is on the USB drive?

    Thanks for your help on these!
    Dick

  2. #2
    Advanced Flight Systems Shawn McGinnis's Avatar
    Join Date
    Sep 2012
    Location
    Canby, OR
    Posts
    861
    Quote Originally Posted by DickF View Post
    1. When using the FD the wingtip is "blue/grey" even though the altitude bug is properly controlling altitude with the AP.
    The tips follow the vertical mode of the autopilot controls. Cyan incdicated ALT:VS where Yellow would be ALT:AS

    Quote Originally Posted by DickF View Post
    2...What does "No Radar" mean?
    You aren't within range of a ADS-B ground station.

    Quote Originally Posted by DickF View Post
    3...Any chance that shift can be restored in v12?
    I'll check with the design team. You could always darken your background with SET -> ENGINE -> BACKGND

    Quote Originally Posted by DickF View Post
    4. The map "range" distance is not being displayed
    The range arc is tucked next to the COM panel or to the right of the track indication.

    Quote Originally Posted by DickF View Post
    5...I am unable to pull up approach plates for a nearby airport (F00)
    This may be a bugged airport. I do see the files on the current 1508 cycle.
    Shawn McGinnis

    Advanced Flight Systems
    support@advanced-flight-systems.com

  3. #3
    Thanks for the info!

    Dick

Similar Threads

  1. GPS Questions
    By rleffler in forum EFIS Installation Questions
    Replies: 5
    Last Post: 01-11-2014, 04:30 AM
  2. Questions for a 3500 in an RV7
    By KHarris in forum AF-3400s, AF-3500s, AF-4500s ... General Discussion
    Replies: 3
    Last Post: 11-28-2013, 01:24 PM
  3. Different GPS questions
    By Peter Pengilly in forum EFIS Installation Questions
    Replies: 3
    Last Post: 04-29-2013, 11:40 AM
  4. 5600 questions
    By phowe in forum AF-3400s, AF-3500s, AF-4500s ... General Discussion
    Replies: 6
    Last Post: 02-08-2011, 05:48 PM
  5. MFD Questions
    By rleffler in forum AF-3400s, AF-3500s, AF-4500s ... General Discussion
    Replies: 2
    Last Post: 01-04-2011, 09:52 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •