Results 1 to 3 of 3

Thread: Adsb to efis connections

  1. #1

    Adsb to efis connections

    Can the AFS adsb be inputed to mfd serial port zero and use pins 24 and 12 for ground and power?
    Last edited by rvdave; 07-01-2015 at 12:43 PM.
    Dave Ford
    RV10

  2. #2
    Advanced Flight Systems Shawn McGinnis's Avatar
    Join Date
    Sep 2012
    Location
    Canby, OR
    Posts
    861
    Unfortunately pin 12 is a switched power signal. The software will toggle this depending on different feedback.
    Shawn McGinnis

    Advanced Flight Systems
    support@advanced-flight-systems.com

  3. #3
    Ok, that shoots that idea, would've been convenient though.
    Dave Ford
    RV10

Similar Threads

  1. Ethernet connections
    By rvdave in forum EFIS Installation Questions
    Replies: 6
    Last Post: 01-22-2015, 09:19 AM
  2. Oat probe connections
    By rvdave in forum EFIS Installation Questions
    Replies: 6
    Last Post: 01-20-2015, 10:52 AM
  3. NavWorx ADS-B Connections
    By Rob Hickman in forum ADS-B
    Replies: 26
    Last Post: 04-27-2013, 01:40 AM
  4. EFIS and AF-Pilot Pitot Static Connections
    By schmoboy in forum EFIS Installation Questions
    Replies: 0
    Last Post: 05-21-2011, 02:44 PM
  5. EFIS Serial Ground Connections
    By flickroll in forum EFIS Installation Questions
    Replies: 4
    Last Post: 03-15-2010, 02:18 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •