Results 1 to 6 of 6

Thread: Verify pin-out

  1. #1

    Verify pin-out

    Looking for verification of my connections. Equipment; AFS 4500EE, GTX 327, Icom A-210, GPS puck #73102, and possible future Navworks 600.

    Hers is what I see;
    AFS Main cable>pin 18>A-210 pin D (aux audio #1)
    AFS>pin 16 shielded gnd>A-210 pin 4 shielded gnd
    AFS>pin 13>GTX 327>pin 19 (encoder)
    AFS>pin 25>Navworks ADSB (?)

    Of coarse there are other connections but these I am unsure of.

    And another question while I'm here, can the 4500 pass through frequency commands from the GPS database?

  2. #2
    Advanced Flight Systems Shawn McGinnis's Avatar
    Join Date
    Sep 2012
    Location
    Canby, OR
    Posts
    861
    The NavWorx will need to use serial #1 or #3 to the ADSB format and also receive the ICARUS data that is sent to the 327.

    Page 50 of the AF-4500 manual v7.4 shows this in more detail.
    Shawn McGinnis

    Advanced Flight Systems
    support@advanced-flight-systems.com

  3. #3
    Quote Originally Posted by Shawn McGinnis View Post
    The NavWorx will need to use serial #1 or #3 to the ADSB format and also receive the ICARUS data that is sent to the 327.

    Page 50 of the AF-4500 manual v7.4 shows this in more detail.
    Thanks Shawn, that answers the Navworks connection. What about the comm freq feed?

  4. #4
    Advanced Flight Systems Shawn McGinnis's Avatar
    Join Date
    Sep 2012
    Location
    Canby, OR
    Posts
    861
    I don't really know anything about the Icom equipment but from the pdf's available online the wiring looks correct.

    Reference:
    http://www.aeroelectric.com/Installation_Data/ICOM/A210/A210_IM.pdf

  5. #5
    Use serial data? TXD and RXD?

  6. #6
    Advanced Flight Systems Shawn McGinnis's Avatar
    Join Date
    Sep 2012
    Location
    Canby, OR
    Posts
    861
    Yes most devices require both transmit and receive. ADS-B does and 327 receives ICARUS altitude.
    Shawn McGinnis

    Advanced Flight Systems
    support@advanced-flight-systems.com

Similar Threads

  1. Verify Emergency Settings
    By darnold in forum AF-5600 & AF-5500 General Discussion
    Replies: 1
    Last Post: 10-06-2014, 10:23 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •