Results 1 to 4 of 4

Thread: POS-12 wiring

  1. #1

    POS-12 wiring

    Using the POS12 for flap position to my 4500. Intended on running the 3 wires next to the power for flap actuator. They are not in a shielded bundle. Do I need to keep them separated and if so by how much? Or do I need to pull them and use a shielded run?

  2. #2
    They don't need shielded wire
    Rob Hickman
    Advanced Flight Systems Inc.

  3. #3
    Quote Originally Posted by Rob Hickman View Post
    They don't need shielded wire
    Just to be clear, they will be along side the actuator power wires. I was considering inductance during high current draw while lowering flaps.

  4. #4
    Advanced Flight Systems Shawn McGinnis's Avatar
    Join Date
    Sep 2012
    Location
    Canby, OR
    Posts
    861
    You can separate or shield the cables if you are concerned but we have not found this to be necessary.
    Shawn McGinnis

    Advanced Flight Systems
    support@advanced-flight-systems.com

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •