Results 1 to 2 of 2

Thread: Rotax CHT Wiring

  1. #1

    Rotax CHT Wiring

    Wiring a clients AFS-5600 using the supplied Stein-Air harnesses that came with the package. According to the manual it says to wire DB37 pins 22 & 23 for the CHT's on the Rotax engine. The Stein-Air harness is already bundled into the panel wiring, only to find there are no sockets or wiring installed in the back shell in those locations. Are terminals 22/23 the correct current wiring, or should something else be used? If those are correct, where do I get the sockets to install them?

  2. #2
    Advanced Flight Systems Shawn McGinnis's Avatar
    Join Date
    Sep 2012
    Location
    Canby, OR
    Posts
    861
    Yes, you will need to pin a 22g wire with a M39029/63-368 into 22 and 23 for a Rotax engine. These are standardly unused connections for tanks 3 and 4 but adapted to work with the Rotax engine.

    If you still are having trouble give us a call to order the additional wires.
    Shawn McGinnis

    Advanced Flight Systems
    support@advanced-flight-systems.com

Similar Threads

  1. rotax 912iS sport throttle position
    By neville in forum AF-5600 & AF-5500 General Discussion
    Replies: 5
    Last Post: 04-18-2015, 06:59 AM
  2. Rotax 914 Fuel Flow Wiring
    By recmob in forum Engine Sensor Installation Questions
    Replies: 1
    Last Post: 03-03-2015, 11:28 PM
  3. Rotax 914 Fuel Pressure on AF3500s
    By Jherbert in forum Engine Sensor Installation Questions
    Replies: 1
    Last Post: 05-11-2010, 08:07 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •