rotax 912iS sport throttle position

[neville]

With the upgrade of the rotax 912iS to 912iS sport the starting sequence changed in that the throttle position
prior to start is now dependent on outside temperature. It is my impression that the CAN buss provides throttle position in % (see graph in operators manual, section 3). Is there a possibility that that information could be added to the engine page?

[Rob Hickman]

If it is in the CAN buss data it should not be difficult to add it.

[neville]

Rob, I contacted Rotax they replied to the affirmative that the CAN buss contains throttle position in percent. I would appreciate your adding it to the list of things to do.

[Rob Hickman]

What version of software are you currently running?

[neville]

Software installed: V X10.04.16-MV16 (Dec 18 2014)
OS: 1 (Dec 2 2011)
FS: 1.0
BB; 5
NXP: 2.11
Net: 6.3
ARNIC: NA

[neville]

I see on the Rotax Owners Forum that some operators are asking their EFIS manufacturer for the addition of throttle position , mainly for ease of adjusting throttle for ECO
(fuel economy) position.