Results 1 to 5 of 5

Thread: ver 10.04.16/system start up

  1. #1

    ver 10.04.16/system start up

    I have installed the subject version and a factory preloaded usb stick. The 5600 startup goes thru three tries to complete the startup. With power supplied to the system the first try sequence is; logo. quick blink, second logo and then times out. After +/- 1 minute a second startup commences with the same results. The third startup goes beyond the second logo to a white screen and a normal startup. This sequence is repeatable over several
    startups over several flights. System data: 5600 s/n 71225, ver 10.04.16 mv16 dec18 2014.

  2. #2
    try it without the USB stick installed.
    Rob Hickman
    Advanced Flight Systems Inc.

  3. #3
    starts normally without usb stick installed

  4. #4
    Email: shawn@advanced-flight-systems.com

    for assistance
    Rob Hickman
    Advanced Flight Systems Inc.

  5. #5
    contacted Shawn, they are on the problem and working for a fix. In the mean time I am using a short USB extender cord to have easy access to the USB port
    and leave the stick out until after start up, then plug it in. Results with all maps available.

Similar Threads

  1. Flight Logs/System Log
    By SDClark in forum AF-5600 & AF-5500 General Discussion
    Replies: 1
    Last Post: 01-05-2016, 01:14 PM
  2. Autopilot indipendant of the EFIS System
    By Mgeiss in forum General Discussion
    Replies: 3
    Last Post: 09-17-2015, 03:15 PM
  3. Screen does not start up
    By Peter Pengilly in forum AF-3400s, AF-3500s, AF-4500s ... General Discussion
    Replies: 8
    Last Post: 10-17-2014, 07:03 PM
  4. System Software Updated not available
    By Alexw in forum AF-5600 & AF-5500 General Discussion
    Replies: 1
    Last Post: 01-20-2014, 04:02 PM
  5. Which system to buy?
    By Swisseagle in forum AF-3400s, AF-3500s, AF-4500s ... General Discussion
    Replies: 5
    Last Post: 07-25-2011, 02:10 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •