Results 1 to 2 of 2

Thread: Dual 5800 and SV-XPNDR-261 serial ports

  1. #1
    Junior Member
    Join Date
    Dec 2014
    Location
    Iowa City, IA
    Posts
    1

    Dual 5800 and SV-XPNDR-261 serial ports

    AF install manual for XPNDR-261 mentions connection to only one serial port on PFD, however in "SkyView" manual XPNDR-261 >>MUST<< be wire in parallel to both screens to same numerical port on each screen, effectively using 2 ports.
    Am I correct to assume I need to connect ONLY to one port on PFD for the AF set-up? Also, my system does have network hub etc.

  2. #2
    You can wire it to any of the AF-5000 serial ports and should only wire it to the pilot PFD screen.
    Rob Hickman
    Advanced Flight Systems Inc.

Similar Threads

  1. Serial ports
    By rvdave in forum EFIS Installation Questions
    Replies: 4
    Last Post: 01-08-2015, 09:33 AM
  2. ADS600B to 3500 serial ports
    By rv8iator in forum ADS-B
    Replies: 6
    Last Post: 01-05-2015, 11:10 AM
  3. transponder/altitude serial ports
    By Phillip in forum AF-5600 & AF-5500 General Discussion
    Replies: 5
    Last Post: 05-28-2014, 12:27 PM
  4. AF-5200 as a second screen -- serial ports?
    By ssonixx in forum AF-5600 & AF-5500 General Discussion
    Replies: 10
    Last Post: 05-05-2013, 06:49 PM
  5. Serial Ports
    By R7237 in forum Installation Questions
    Replies: 1
    Last Post: 12-27-2012, 08:19 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •