Results 1 to 3 of 3

Thread: Current shunt

  1. #1

    Current shunt

    My engine harness came with a current shunt, I am using vertical power which says not to use an external shunt. I'm assuming I dont really need then to mount the external shunt but would there be any secondary reason to install it?

    Dave Ford

  2. #2
    Advanced Flight Systems Shawn McGinnis's Avatar
    Join Date
    Sep 2012
    Location
    Canby, OR
    Posts
    751
    The shunt current from the EFIS Engine Harness pins 24 & 25 (or a hall effect current sensor on 29, 11, & 30) can be displayed on the engine's electrical bar graph. Where the VPX current information is displayed on the CHECK -> ELECT page.

    Name:  shunts.jpg
Views: 212
Size:  19.2 KB
    Shawn McGinnis

    Advanced Flight Systems
    support@advanced-flight-systems.com

  3. #3
    That's clear now, thanks,

    Dave

Similar Threads

  1. Shunt interchange
    By Blain in forum Engine Sensor Installation Questions
    Replies: 2
    Last Post: 01-05-2016, 06:55 PM
  2. Shunt amps
    By rvdave in forum EFIS Installation Questions
    Replies: 1
    Last Post: 02-09-2015, 02:32 PM
  3. Shunt Question
    By MarkL in forum EFIS Installation Questions
    Replies: 4
    Last Post: 05-09-2011, 09:25 AM
  4. Configure Shunt Amperage
    By Dave Cogan in forum AF-3400, AF-3500 ... General Discussion
    Replies: 1
    Last Post: 06-01-2010, 07:14 AM
  5. Use of Hall Effect Current Sensor without Shunt
    By NoahF in forum AF-3400s, AF-3500s, AF-4500s ... General Discussion
    Replies: 9
    Last Post: 04-20-2010, 09:22 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •