I too would be very interested in this feature!
Type: Posts; User: CharlieWaffles
I too would be very interested in this feature!
Coming back to this. My ASIGain was set to the default of .05. Would I increase or decrease this value to correct for the Airspeed climb problem?
Thanks Shawn. It does maintain the set IAS, but seems like initially it wants to be over the set IAS and then nose up until it reaches the set IAS climb speed and then maintains it.
I updated to the latest release on my 5600T and have appreciated the new IAS climb option for the AP. However when I engage the AP with this mode and I am already at the desired IAS, the AP commands...
There is a lot of processing that happens to the AFS data charts before we get them. They have to be geo-referenced (approach plates, etc..) and have to be formatted to go into the AFS systems. I...
Something I and another building have found is the wires going into the RPM sensor can come loose. If you slightly pull or push on the wires where they enter the RPM Sensor in the magneto you can...
The Flight Data Systems GD-40 CO2 detector is reported to work with the AFS EFIS system. Is there any information on how it is wired into the harness?
On the price list/options there is a generic Backup Battery option (http://www.advanced-flight-systems.com/Pricing/pricing.html) - AF-BAT. Is this suitable for the 5600 series? I have some paperwork...
Thanks, I had seen the cutout dimensions on the product page and then skimmed the manual, but missed that page. It was right under my nose. Thanks!
I see there is information for the cutout for the 5600 on the website, but what is the size of the unit once mounted? I am trying to determine how much real estate I need to leave around the hole for...
Rob, is it possible to have only a XM Music subscription with the XM Receiver or do you have to have a weather service and then ADD music? Just looking for a music only solution since I will be using...
Thanks Bob, small world indeed. I didn't see that the new 5500 series book was out yet, as I was still working off the old manual, thus my research to find new info. I just grabbed the new book.
...
What is the amperage requirements for the 5500 and 5600 EFIS systems? Just working on my electrical plan.
Also, other than an ethernet hub, do any of the other EFIS accessories have power...
Does anyone have the DXF file for the panel cutout for the flat pack head unit?
Thanks, I was just looking for an option rather than mounting ANOTHER gps antenna.
Did this wind up happening? Can we input a video source from say a tail camera? How about USB based video playback?
Since the ADS-B unit can use ARINC to use an external GPS for its position, does that mean a Garmin GPS could be used to feed this to the ADSB even when its also connected via serial to the AFIS?
Does the EFIS system have the capability to call out ground proximity during approaches? Would be a cool feature if it could be enabled when on an instrument approach for additional situational...
I just picked up a copy of these and they work great. Just like the larger 1/4" size, just smaller obviously. These will work great in the wing root connects.
Excellent! I'll have to make a drive over and check em out next week.
They have the larger disconnects for static tubes 3/8, not the smaller size that the AOA uses (1/8"). Thanks though.
Is the AOA tubing 1/8" OD? Do you know of any quick disconnect style that can be used with this tubing? I'd like to have the tubing plug into a connector in the wing root rather than have to wait and...
What recommendations or issue are available regarding installing the Aoa in a RV10 wing that also has the Duckworks leading edge lights? It's the same outboard bay and I wonder if the light setup...
Any news or information on announcements at Sun and Fun? I heard perhaps a new transponder? Pricing for 5600?
Excellent, you guys are 27% of the reason I'm trekking out there!