Yes I have ADSB115K and 115200
I sometimes fly in congested areas around SFO.
ADS-B mode: Master (PID:564) IDLE
TRFC:3442 FIS-B:390 OSHIP:308
NXRD:--:-- MTR:-00:01. TFR:-00:01...
Type: Posts; User: lux wrangler
Yes I have ADSB115K and 115200
I sometimes fly in congested areas around SFO.
ADS-B mode: Master (PID:564) IDLE
TRFC:3442 FIS-B:390 OSHIP:308
NXRD:--:-- MTR:-00:01. TFR:-00:01...
Yes I am getting UAT messages on the status page. Perhaps I have made some mistake on the settings page of AFS 4500?
Also I had been working from notes in the cockpit and mistakenly entered my...
I built the home brew Stratux ADS-b "in" for my 4500.
Traffic works, but I'm not getting weather?
I'm seeing my ghost identifier. I tried to enter my hex code in configuration, but when I hit...
I think Bill is referring to this method by Chris Welsh, illustrated on vansairforce.com (scroll down to post 10): http://www.vansairforce.com/community/showthread.php?t=51079&highlight=gps+garmin...
I don't know what "newest models" are, but I received my GPS18x-5Hz a year ago and it has magnets.
I have dual Decks and I am aligning the magnetometers to the Decks. The manual calls for less than 0.2 degrees variance in pitch and roll. One of the Decks is very true when comparing the front face...
Well, in hindsight, it would be easier: if I hadn't drilled holes in my wing and mounted the probes at what seemed like a good location to me; only to much later receive a harness which is shorter...
Does anyone have suggestions of good sources for purchasing the ethernet hub?
Did you splice the shield too?
Where are people mounting the OAT probes? I am building an RV-7 and I placed the probes under the wings, outside of the prop wash. I don't think that, with less than 10 feet of length of harness...
I received my 4500s yesterday. One of them was missing the control knob, which I found in the box. I checked the other knob and found it less than finger tight. What torque does AFS use to attach the...