Please.
Ed Holyoke
Type: Posts; User: Bicyclops
Please.
Ed Holyoke
I mistyped. It is 158w that i see. Don't know where 9156 came from. They couldn't have messed with the antenna connection as that is behind the baggage bulkhead. I'll be pulling that this month for...
Howdy,
I had by transponder check done recently and ever since I get an intermittent alert of Transponder TX LOW PWR 9156W).
I was not present when the xpdr check was done. Is there a special...
The EM screen is the one with the engine monitor board built in, right? That is my PFD and it is where I was trying to calibrate it. I'll try it again.
Ed
Not sure I understand that. It is wired directly to the EFIS. I do not have an EMS as they hadn't been incorporated at that time. I'll try and dig up my as built wiring diagram to see what pins. It...
Ping. The flap position was working before the upgrade, but not after.
Ed
That works. There is no "V16" button, but when it is putting charts on the thumb drive it shows Dynon Skyview charts on the activity line.
Ed
Howdy,
I've downloaded the purportedly latest version of the data manager software from their site. No V16 button. I've emailed them and tried to call with no success. Do you have a link to the...
Howdy,
I loaded the V16 software on my 5600s, hardware V7 and now my flap position sensor is no longer working. I'm getting flap overspeed warnings. Operating the flaps does not bring up the...
Available? Gonna be needing weather depiction to fly to Osh.
Ed Holyoke
Yeah, what he said and...updated to firmware on the GPS250. I've got one of each and the 250 doesn't know what time it is.
Ed Holyoke
OK, I set the xpdr to ADS-B in = UAT only. I also enabled TIS. I got "OK" on the display. I showed ADS-B and TIS-B targets. That is all good. I did a PAPR and failed NIC. That might have been because...
Howdy Bob,
Looking for own ship N number in the data stream makes some sense. Then, I assume, the EFIS is supposed to scrub own ship out of what it displays, though it doesn't always seem to. I...
Howdy,
My 5600 EFIS is showing "No Radar" in the lower right corner. I display traffic and I have METAR/TAF/TFRs. I didn't see a target displayed for that Gulfstream that I shared Newhall Pass...
I brought up the ADS-B info page and saw a list of 3 TFRs, 2 of which were listed as expired. They are 7/3555-1, which is the New Years Day Rose Bowl game TFR, and 7/3701-1, which is the fire TFR in...
Howdy,
Running 2 5600s with GPS2020 and mode S for ADS-B out and the single channel ADS-B in box. I've got the 11/1/17 version of the software. I am not seeing TFRs on the displays even though...
Howdy,
I'm using a Floscan 201 and after 2 engine runs I see 0 fuel flow indication. I see that pin #15 is +5v. Floscan's website says that it wants 12-15v. Is there a suitable pin on the connector...
Howdy Shawn,
What format/file name does an imported flight plan have to have?
Thanks,
Ed
Howdy,
For those of us who use Android instead of IOS, is there any plan to support communication of flight plans, ADS-B output, etc. to and from apps like Avare via WiFi?
Thanks,
Ed
Howdy,
Now that the Dynon GPS-2020 is shipping, does the current software support it for fully compliant ADS-B out?
Thanks,
Ed Holyoke