Search:

Type: Posts; User: Shawn McGinnis

Page 1 of 20 1 2 3 4

Search: Search took 0.02 seconds; generated 27 minute(s) ago.

  1. Yea, looking from the prospective of the MFD the...

    Yea, looking from the prospective of the MFD the Nav source, SL-30, is physically wired to a Remotely to the screen.
  2. Replies
    5
    Views
    542

    I've added your request for review. This fits in...

    I've added your request for review. This fits in with our IFR enhancements scheduled for the next major revision. As with all features the more interest in the feature the more quickly it will be...
  3. Yes, disable the Serial Port 3 on the MFD. If...

    Yes, disable the Serial Port 3 on the MFD. If its wired to the PFD then the MFD should not be configured to expect a SL-30 wired to ITS serial port #3. The GPS/NAV Data Source 2 will then transfer...
  4. Replies
    5
    Views
    542

    The EFIS will draw the lead in arrow if you...

    The EFIS will draw the lead in arrow if you select the runway on the destination airport of the flight plan.
  5. You will need the AF-ARINC module wired to one of...

    You will need the AF-ARINC module wired to one of the serial ports probably serial 4. This is what will drive the TruTrak.

    Something like...
  6. Replies
    1
    Views
    392

    The 912 can be interfaced to the 2500 using our...

    The 912 can be interfaced to the 2500 using our 71,420RX RPM Interface board. Call us at 503-263-0037 x 2 for ordering.

    The Rotax engines have a 5th trigger coil for RPM monitoring. The trigger...
  7. Replies
    7
    Views
    1,157

    https://www.advancedflightsystems.com/drawings-cad...

    https://www.advancedflightsystems.com/drawings-cad-models.php#AF-5000Wiring
    See our AF-5000 R7 EFIS Main Harness - w/ SV Network.

    You will find the locations to populate the SV Network pigtail...
  8. Replies
    15
    Views
    4,004

    Which port shouldn't effect the EFIS. Be sure to...

    Which port shouldn't effect the EFIS. Be sure to properly eject the drive from the computer.

    If this is a new drive be sure that you are using FAT32 filesystem and that the label is set to...
  9. This requires special modifications to the EFIS...

    This requires special modifications to the EFIS hardware and additional circuitry.
  10. Replies
    1
    Views
    515

    You don't. With the Dynon Pitot tube and...

    You don't. With the Dynon Pitot tube and SV-ADAHRS you will have AOA. This option is there for customers that are coming from wing-port systems that don't want to install the new pitot.
  11. Replies
    1
    Views
    389

    Checklists should have a 13 line limit. Title +...

    Checklists should have a 13 line limit. Title + 12 items. Ensure you are using 96 characters or less on all lines and that you have not used any commas. See page 112 (v15.0) of the pilots guide for...
  12. Replies
    2
    Views
    571

    Can you change to TRK?

    Can you change to TRK?
  13. Replies
    2
    Views
    824

    Try https://tfr.faa.gov (https://tfr.faa.gov/) or...

    Try https://tfr.faa.gov or the FAA UAS map https://faa.maps.arcgis.com/apps/webappviewer/index.html?id=9c2e4406710048e19806ebf6a06754ad

    Does it come and go with ADS-B?
  14. Replies
    2
    Views
    497

    Do you have the SV-AP-PANEL...

    Do you have the SV-AP-PANEL connected?
    Have you scanned for it in the Advanced SV-Network?
    Have you calibrated the trim in Elevator Trim calibration page?
  15. Replies
    15
    Views
    4,004

    Do you have the HRTERRAIN folder on the USB drive...

    Do you have the HRTERRAIN folder on the USB drive and is synthetic vision working properly? Post a picture of your CHECK -> ABOUT page, the bottom shows what GPS is feeding that data.



    SET ->...
  16. Replies
    4
    Views
    1,063

    You can send in the system logs and...

    You can send in the system logs and svautopilot.log files and we could take a look. If you haven't already, try re-running the servo calibration process.
  17. Replies
    1
    Views
    597

    That seems odd. There may be something more going...

    That seems odd. There may be something more going on.

    I would recommend asking TCW directly but I've seen this done with relays like below, or with diodes.
    460
  18. Replies
    5
    Views
    1,093

    You should still be able to move/zoom it with the...

    You should still be able to move/zoom it with the joystick. To change plates touch the center of the plate screen then touch plate again.
  19. Replies
    4
    Views
    1,063

    Have you performed the autopilot calibration...

    Have you performed the autopilot calibration process within calibration? It has you move the control surfaces to all corners then plays back the movements to confirm.
  20. Replies
    5
    Views
    1,093

    What method are you using to bring up the plates?

    What method are you using to bring up the plates?
  21. You might get away with dropping GSA as you are...

    You might get away with dropping GSA as you are not reporting NACv to an transponder but RMC and GGA are required.
  22. Replies
    1
    Views
    977

    We have a engineer working on them at the moment....

    We have a engineer working on them at the moment. No firm release schedule though.
  23. Replies
    11
    Views
    4,031

    I'll have Rob test it today.

    I'll have Rob test it today.
  24. That list is the setup for the 18-5Hz puck. PGRMT...

    That list is the setup for the 18-5Hz puck. PGRMT is not used by the Advanced Deck displays.

    You should be able to configure the Ublox's Main Talker ID to 1 - GP (GPS) and avoid the system...
  25. Replies
    1
    Views
    708

    Yes, here are some threads: ...

    Yes, here are some threads:

    http://advanced-flight-systems.com/forum/threads/1409-Uavionix-Echo-UAT-gt-AF-4500
    http://advanced-flight-systems.com/forum/threads/1411-ADS-B-for-4500
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4