Search:

Type: Posts; User: Shawn McGinnis

Page 1 of 20 1 2 3 4

Search: Search took 0.02 seconds.

  1. Do you have the labels on the wing indicating the...

    Do you have the labels on the wing indicating the AOA port location or does your SeaRey use the Dynon AOA Pitot Tube?
  2. Replies
    10
    Views
    1,206

    The pitch adjust should save between power...

    The pitch adjust should save between power cycles. The easiest way to verify backup power is to boot the EFIS by pressing and holding button 1 (left most bottom button) for about 5 seconds. If the...
  3. If it was a systemic issue I would recommend...

    If it was a systemic issue I would recommend lowering the Landing Warning Override value. We do see when rain causes issues with the pressure ports.
  4. Replies
    4
    Views
    2,271

    Give us a call at 503.263.0037x2 and Tricia can...

    Give us a call at 503.263.0037x2 and Tricia can set up an RMA when you have some downtime.
  5. Replies
    10
    Views
    1,206

    Your AF-5500 needs backup power connections. The...

    Your AF-5500 needs backup power connections. The primary reason is to maintain the clock but there are other reasons. A screen should draw less than 1mA which would be over a year (for a 12V 10Ah...
  6. Replies
    10
    Views
    1,206

    Harold, Checking that your backup battery is...

    Harold,

    Checking that your backup battery is correctly installed as suggested will ensure the screen saves all of its settings at the shutdown countdown. My other recommendation would be to verify...
  7. Replies
    1
    Views
    259

    To delete all the entries from your flight log...

    To delete all the entries from your flight log would be [SET] -> [LOGS] -> [LOGBOOK] -> then press and hold [DEL ALL]

    To download your engine data logs would be [SET] -> [LOGS] -> then press one...
  8. Replies
    1
    Views
    472

    I'll have to check, I think it might already have...

    I'll have to check, I think it might already have an overload structure.
  9. Thread: Toga

    by Shawn McGinnis
    Replies
    1
    Views
    392

    Servo based throttle control is within the Dynon...

    Servo based throttle control is within the Dynon brand vision.
  10. Replies
    12
    Views
    8,364

    As a quick note the software is not currently...

    As a quick note the software is not currently available for download from the website. If you are interest in testing the latest let us know.
  11. Replies
    1
    Views
    461

    It's in early release right now to minimize...

    It's in early release right now to minimize call/support volume but I would expect in on the website this month.
  12. Replies
    11
    Views
    2,371

    Have you verified your AP MIN and MAX speeds are...

    Have you verified your AP MIN and MAX speeds are correct? The flight director will nose down if your minimum speed is set too high. Your MIN and MAX speeds should be a little above Vs1 and little...
  13. Replies
    11
    Views
    2,371

    When reading these lines the first block, [...

    When reading these lines the first block, [ 29.546681], is the system run time in seconds. So its perfectly normal indications of the equipment being discovered.
  14. Replies
    3
    Views
    758

    Adapters seem to work, I would check with local...

    Adapters seem to work, I would check with local camera and electronics shops. Anything <=2GB will work so you can get away with using old 128MB cards as well.
  15. Replies
    3
    Views
    621

    Sounds like the PFD needs to be sent back.

    Sounds like the PFD needs to be sent back.
  16. Replies
    3
    Views
    621

    My gut is saying that your ethernet jack might...

    My gut is saying that your ethernet jack might have a cracked pin. Try applying some finger pressure to the connector on one EFIS then the other and see if the data comes back when physically...
  17. Correct you wont have anything in those spots. ...

    Correct you wont have anything in those spots.


    If you don't have trim position indicators you don't need the pins.


    If you have a flap position indicator that would have you move 34 to 9.
    ...
  18. You will connect pin 6 of the P-Mags to SV-EMS...

    You will connect pin 6 of the P-Mags to SV-EMS pins 32/33 if they are 12V signal output or pins 34/35 for 5V signal levels. Here is a list of all conversions from Internal EMS to SV-EMS. Kavlico...
  19. The AF2MAPUS.AFM contains only the occasional...

    The AF2MAPUS.AFM contains only the occasional navaid within the Canadian boundary. The data is supplied for USA and its territories.
  20. If using the Garmin 18x disconnect the EFIS TX...

    If using the Garmin 18x disconnect the EFIS TX connection to the 18x's RX pin this will help keep it alive longer.
  21. Replies
    2
    Views
    1,419

    Congratulations of finishing the build. To make...

    Congratulations of finishing the build. To make sure we are on the same page can you verify that you are running 7.5.0 software on the EFIS?...
  22. Replies
    6
    Views
    2,272

    Only the Non-S has the replaceable clock battery....

    Only the Non-S has the replaceable clock battery. The AF-4500 does have a soldered in battery but it was made obsolete with software so no replacement is required.
  23. Replies
    21
    Views
    7,138

    What Rob was saying is you need to select [WIFI]...

    What Rob was saying is you need to select [WIFI] as your source not [XMWX] as that is for only for paid SiriusXM Weather subscriptions with a WxWorx Receiver. [WIFI] would be from your DRX. You will...
  24. Replies
    3
    Views
    1,727

    If you find a way the experimental community...

    If you find a way the experimental community would love to hear.
  25. Replies
    21
    Views
    7,138

    I really don't have experience with the product,...

    I really don't have experience with the product, give uAvionics a call. They have always been really helpful.
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4